Notifier by Honeywell Fire Alarm Systems

Product Details:

The F/MCP/GLASS is a manual call point that initiates an alarm on a fire alarm system:
Features
It's a non-coded, addressable call point that works with Notifier intelligent fire alarm control panels (FACPs). It uses a patented high-speed communication protocol called FlashScan. The F/MCP/GLASS is compatible with all Notifier intelligent panels.
Connection
It connects to the control panel using a two-wired general connection. This connection allows for both alarm signaling and normal LED operation.
LED status
The LED status is controlled by the fire panel. It blinks green when the device is polled, and is continuously red to indicate fire.
Mounting
It's installed as a flush mounted device in a normal internal environment. It's not intended for use in an externally exposed or hazardous location.

Product Details:

The Notifier FSP-951T is a photoelectric smoke and thermal detector that can be used in residential, commercial, and industrial settings. It is designed to provide early warning of fire.
Features:
Photoelectric smoke sensing: Uses a unique optical sensing chamber to detect smoke from a variety of combustion sources
Thermal sensing: Uses dual electronic thermistors to detect temperatures up to 135F (57C)
Addressable: Can be set with rotary address switches to identify the location of each detector
Programmable sensitivity: The sensitivity can be adjusted using the control panel software to suit the environment
Self-test feature: Can perform up to 150 tests before reaching the end of its life
Detachable base: Makes installation, service, and maintenance easier

Product Details:

The Notifier FAPT-851 is an intelligent, addressable, multi-sensing, low-profile smoke detector designed for use with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs). It combines photoelectric and thermal sensing technologies to enhance false alarm immunity. The detector features automatic drift compensation and adjusts its sensitivity based on environmental conditions without operator intervention or control panel programming. 
Here's a more detailed breakdown:
Key Features:
Multi-Sensing: The FAPT-851 utilizes both photoelectric and thermal sensing elements. 
Addressable: It communicates with the fire alarm control panel via a digital address, allowing for precise identification of the detector in alarm. 
Automatic Sensitivity Adjustment: The detector's microprocessor adjusts its sensitivity based on environmental conditions, including temperature and dust levels. 
Low Profile: The detector has a sleek, unobtrusive design. 
Dual LED Indicators: Provides 360-degree visual indication of normal and alarm status. 
Polarity-Free Wiring: Simplifies installation by allowing connections without regard to polarity. 
UL Listed: The FAPT-851 is UL-listed for both photoelectric smoke detection and heat detection at 135F (57.2C), according to Fire Protection Systems S.A.. 
Applications:
The FAPT-851 is suitable for a wide range of environments, including office buildings, schools, and industrial facilities.
Its ability to automatically adjust sensitivity makes it particularly useful in areas where the use of the space may change.
It is also ideal for areas prone to nuisance alarms due to environmental factors.

Product Details:

The Notifier by Honeywell FST-951R is an intelligent, addressable fixed-temperature heat detector designed for reliable fire detection in various environments. It's part of the ONYX series and is known for its advanced thermal detection technology, low maintenance design, and compatibility with Notifier's intelligent fire alarm control panels.
Key Features and Description:
Fixed Temperature Sensing:
The FST-951R triggers an alarm when the ambient temperature reaches a pre-set threshold, typically 135F (57C).
Intelligent Addressable System:
It communicates its specific location and status to the fire alarm control panel, allowing for precise identification of the alarm source.
Low Maintenance:
Designed to minimize false alarms caused by dust, humidity, or steam, reducing the need for frequent maintenance.
Compatibility:
It utilizes Notifier B501 series bases for universal mounting and seamless integration with their fire alarm systems.
Visual Indication:
Features a 360 visible dual LED indicator for clear visual confirmation of an alarm event.
Remote Testing:
Supports remote testing functionality from the fire alarm control panel, simplifying system maintenance.
Modern Design:
The FST-951R boasts a sleek, contemporary design, making it aesthetically suitable for various building designs.
Rotary Address Switches:
Enables precise detector addressing using rotary switches for easy identification.
Operating Temperature Range:
Operates within a temperature range of -20C to 38C (-4F to 100F).
Detector Spacing:
UL approved for a spacing of 50 feet (15.24 meters) center to center.
Analog Communications:
Incorporates analog communication protocols for enhanced system performance.
Low Standby Current:
Features low standby current consumption.

Product Details:

The FRM-1 is a relay control module from Honeywell that's used in fire safety systems to interface with various devices:

Product Details:

The FCM-1 is a fire alarm control module that provides a circuit for notification appliances, such as horns, strobes, and speakers:
Features
Addressability
Can be activated manually or through panel programming on a select basis
LED
Blinks green when receiving communication from the control panel, and turns on red when activated
Wiring
SEMS screws with clamping plates for ease of wiring
Supervision
Provides supervised monitoring of wiring to load devices
Temperature range
32F to 120F (0C to 49C)
Humidity range
10% to 93% non-condensing
Dimensions
4.5" (114.3 mm) high x 4" (101.6 mm) wide x 1.25" (31.75 mm) deep
Mounting
Mounts to a 4" (101.6 mm) square x 2.125" (53.975 mm) deep box
The FCM-1 is intended for use in intelligent, two-wire systems. The individual address of each module is selected using the built-in rotary switches.

Product Details:

The FMM-1 is a monitor module from Notifier that monitors a circuit of dry-contact input devices. It's used in intelligent, two-wire fire alarm systems.
Features:
Built-in type identification: Automatically identifies the module as a monitor module to the control panel
LED indicator: Indicates normal or off-normal operation, and latches on to steady red to indicate an alarm
Direct-dial address entry: Allows you to enter the address of the module directly
SEMS screws: Comes with SEMS screws and clamping plates for easy wiring
Fault tolerant: Provides a fault tolerant initiating device circuit (IDC) for fire alarm and supervisory devices
High noise immunity: Has high immunity to electromagnetic interference (EMI) and radio frequency interference (RFI)
Uses: Supervises conventional heat detectors, Supervises pull stations, Supervises two-wire smoke detectors, and Can be used to replace an MMX-1 module in existing systems.

Product Details:

The FSP-951T is a plug-in smoke and heat detector that combines photoelectric smoke detection with thermal temperature monitoring. It's made by Notifier, a Honeywell company.
Features
Sensitivity: Can be programmed in the control panel software
Temperature sensing: Fixed temperature thermal sensing at 135F (57C)
Point ID: Each detector's address can be set
Monitoring: Sensitivity is continuously monitored and reported to the panel
Test feature: Can be tested with a test magnet or remotely from the panel
Tamper resistant: Has a built-in tamper resistant feature
Removable cover: Has a removable cover and insect-resistant screen for cleaning

Product Details:

The Notifier by Honeywell FSP-951 is an intelligent, addressable photoelectric smoke detector designed for early detection of visible smoke, particularly from slow, smoldering fires. It's part of the Notifier ONYX Series and offers a sleek, low-profile design with compatibility with Notifier's intelligent fire alarm control panels. The FSP-951 utilizes advanced sensing technology and precise detection algorithms to minimize false alarms while providing reliable fire detection.

Product Details:

The Notifier FST-851 is a plug-in thermal heat detector that is designed to provide intelligent property protection:

Features
The FST-851 has a low-profile design, integral communication, and a thermistor sensing circuit. It also has a built-in functional test switch that can be activated by an external magnet.

Detection
The FST-851 can detect fixed temperatures of 135F/57C, rate-of-rise, and high temperatures of 190F/88C.

Compatibility
The FST-851 is compatible with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs).

Mounting
The FST-851 can be mounted directly on a surface or in an electrical box.

Point ID
The FST-851 has a Point ID capability that allows each detector's address to be set with rotary address switches.

Test feature
To activate the test feature, place the optional test magnet against the cover in the magnet test area. The LEDs should latch on within 10 seconds.

Product Details:

The Notifier by Honeywell FSP-951T is an intelligent, addressable, multi-sensor smoke and heat detector. It combines a photoelectric smoke sensor with a 135F (57C) fixed temperature thermal sensor for reliable fire detection. This detector is designed for use with Notifier's intelligent fire alarm systems.
Here's a more detailed description:
Key Features:
Dual Sensing:
It utilizes both photoelectric (smoke) and thermal (heat) sensing elements, providing a broader range of fire detection capabilities.
Intelligent Addressable Technology:
The FSP-951T communicates with fire alarm control panels, allowing for precise monitoring and location identification of alarms.
Point ID Capability:
Each detector has a unique address, set with rotary address switches, enabling accurate identification of alarm locations.
Programmable Sensitivity:
The detector's sensitivity can be adjusted through the fire alarm control panel software, allowing for customization to suit different environments.
Drift Compensation:
Automatically adjusts sensitivity to compensate for dust accumulation, reducing false alarms.
Built-in Tamper-Resistant Feature:
Helps prevent unauthorized removal or tampering with the detector.
Remote Test Capability:
Some models are compatible with remote test features, allowing for testing without physically accessing the detector.
Easy Installation and Maintenance:
Plug-in design and removable cover facilitate easy installation and cleaning.
Dual LED Indicators:
Provide 360-degree visibility for status indication (alarm, normal, etc.).
Compliance:
UL listed and FM approved, meeting relevant safety and performance standards.
In essence, the FSP-951T is a versatile and intelligent detector that provides reliable fire detection, easy installation, and intelligent features for modern fire alarm systems.

Product Details:

The NBG-12LX is a dual-action manual call point (MCP) for fire alarm systems made by Honeywell.
Features
Operation Push in, then pull down on the handle to activate the alarm.
Indicator
Built-in bicolor LED that flashes green when normal and red when in alarm.
Mounting
Semi-flush or surface mount.
Reset
Insert a key or hex, twist a quarter-turn, open the front cover, and the handle will return to its original position.

Product Details:

The FSP-851 is a photoelectric smoke detector from Notifier that has a number of features, including:
Sensing: The FSP-851 has a photoelectric detector that can sense smoke from a variety of combustion sources.
Communication: The FSP-851 uses analog communications to transmit smoke density information to a control panel.
Programmable sensitivity: The FSP-851's sensitivity can be programmed in the control panel software.
Continuous monitoring: The FSP-851 continuously monitors its sensitivity and reports it to the control panel.
Point ID: The FSP-851 has rotary address switches that allow each detector to be assigned an address. This helps with selective maintenance when a detector chamber becomes contaminated.
Dual LEDs: The FSP-851 has dual LEDs that provide 360 visibility.
Low standby current: The FSP-851 has a low standby current.
Operating temperature: The FSP-851 operates within a temperature range of 32F to 120F (0C to 49C).
The FSP-851 is compatible with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs).

Product Details:

The NOTIFIER FSCO-951 is an intelligent, addressable carbon monoxide (CO) detector designed for commercial and residential life safety systems, meeting the UL 2075 standard. It uses advanced electrochemical sensing to detect hazardous levels of CO and communicates them to a fire alarm control panel for precise location and alarm reporting. Key features include point ID capability via rotary switches for precise device identification, a sleek design, and a 10-year CO cell with an end-of-life warning.

Product Details:

The FCM-1 is a control module that provides a circuit for notification appliances in fire alarm systems. It can be used to power horns, strobes, and speakers. The FCM-1 can be activated manually or through panel programming, and it can be activated on a zone or area basis.

Here are some features of the FCM-1:
Monitoring
The FCM-1 monitors the wiring to load devices that require an external power supply. It reports the status of the wiring to the panel as normal, open, or short circuit.

Addressability
The FCM-1 can be activated on a select basis, such as a zone or area of coverage. Each FCM-1 uses one of 159 possible module addresses on a SLC loop.

Built-in type identification
The FCM-1 automatically identifies itself to the control panel.

LED indicator
The FCM-1 has a panel-controlled LED indicator that blinks with each poll received from the control panel.

The FCM-1 is made by Honeywell International.