Honeywell Fire Alarm Systems

Product Details:

The TC806B1076 Photoelectric Smoke Sensor is an intelligent detection device which provides two-way communication with the Honeywell fire alarm systems.

Product Details:

The Honeywell TC806B1084 is an intelligent, low-profile, photoelectric smoke and tharmal detector designed for use in Honeywell fire alarm systems. It features a sleek, contemporary design and is a direct replacement for older models like TC806B1076, TC806DNR, and TC806B1084. The detector communicates with the fire alarm panel using a proprietary protocol, sending its address, sensor type, and an analog value. This allows the panel to monitor sensitivity and detect alarm, pre-alarm, normal, or trouble conditions.
Here's a more detailed breakdown:
Key Features:
Photoelectric Smoke Detection: Uses an optical sensing chamber and light-scattering principle to detect smoke particles.
Intelligent Communication: Two-way communication with the fire alarm panel for monitoring and reporting.
Addressable: Each detector has a unique address set via rotary switches, enabling precise location identification for maintenance.
Programmable Sensitivity: Sensitivity can be adjusted within the fire alarm panel's software.
FlashScan and CLIP Compatibility: Works with Honeywell's FlashScan and CLIP protocol systems.
Low-Profile Design: Modern, sleek design.
Dual LEDs: Provide visual indication of the detector's status (blinking green for normal, steady red for alarm).
Remote Testing: Can be tested remotely from the fire alarm panel.
Durable and Low Maintenance: Designed for reliable performance with minimal maintenance requirements.
Wide Application: Suitable for commercial, industrial, and institutional settings.
Additional Information:
The TC806B3104 is a specific model within the TC806B series.
It is designed to meet UL 268 7th Edition standards.
The detector base can affect the overall diameter of the installed detector.
Operating temperature range is 32F to 100F (0C to 38C).
The detector has a 360-degree viewing angle for its visual indicators.

Product Details:

The Honeywell TC810R1024 Addressable Relay Module provides the system with a dry contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment

Product Details:

Multisensor fire detector using patented dual angle optical scatter as well as additional heat detector sensor evaluation to guarantee the detection of different types of fire from smoldering fires to open fires with constant sensitivity level. Smoke sensor signal identification to ensure smoke classification and reduction of false alarms caused by interferences, for instance, water vapor or dust. Used when early and reliable fire detection is requested. Because of its excellent detection characteristics and enhanced false alarm management, the detector is also able to identify the standardized TF1 and TF6 test fires. The O²T multisensor fire detector is also suitable for applications with higher temperatures of up to +65 C. The detector is provided with an integrated isolator. A remote indicator can be connected.

Product Details:

The Honeywell S464G1007 is a dual-action, addressable manual pull station designed for fire alarm systems. It features a key-lock reset, a unique addressable interface that works with compatible Honeywell Intelligent Fire Alarm Control Panels (FACPs) to pinpoint its exact location, and meets ADA guidelines. To activate, a user pushes in and pulls down the handle, which displays "ACTIVATED" until the system is reset with a key

Product Details:

The TC809A1059 Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary decade switches.

Product Details:

Honeywell TC809B1008 FlashScan Miniature Monitor Module is a miniature monitor module a mere 1.3" (3.302 cm) H x 2.75" (6.985 cm) W x 0.5" (1.270 cm) D that supervises a Style B (Class B) circuit of dry-contact input devices.

Product Details:

Description. Honeywell TC808B1058 Rate-of-Rise Heat Detector plug-in thermal detectors with integral communication have features that surpass conventional detectors. Point ID capability allows each detector's address to be set with rotary, decimal address switches, providing exact detector locations.

Product Details:

Fire Lite Alarms (Honeywell) AD355 is an intelligent, addressable, multi-sensing, low-profile detector. The detector uses a combination of photoelectric and thermal sensing technologies to increase immunity to false alarms. It has a microprocessor in the detector head that processes alarm data.

Product Details:

The Honeywell TC806B3010 is a low-profile, intelligent photoelectric smoke sensor, part of the FSP-951 series. It offers features like FlashScan technology for quick and reliable detection, Point ID capability for pinpointing device location, and continuous sensitivity monitoring. It also includes a built-in tamper-resistant feature and low standby current.
Here's a more detailed breakdown:
Intelligent Photoelectric Sensor:
The TC806B3010 uses photoelectric technology to detect smoke particles, offering a reliable means of early fire detection.
FlashScan:
This feature allows for fast communication between the detector and the fire alarm control panel, enabling quicker response times.
Point ID Capability:
Each detector has a unique address that can be set using rotary, decimal address switches. This allows for accurate identification of the detector's location in case of an alarm, facilitating efficient maintenance and troubleshooting.
Continuous Monitoring:
The sensor continuously monitors its sensitivity and reports any changes to the fire alarm control panel. This ensures that the detector is always operating at optimal performance.
Low Profile Design:
The low-profile design allows for discreet installation in various locations.
Built-in Tamper-Resistant Feature:
This feature prevents unauthorized removal or tampering with the detector, ensuring its reliable operation.
Low Standby Current:
The detector consumes minimal power in standby mode, reducing overall energy consumption.
SEMS Screws:
These screws simplify wiring connections during installation.
Remote LED Option:
A remote LED accessory can be added for visual indication of the detector's status.
Optional Bases:
Sounder, relay, and isolator bases are available for expanded functionality.

Product Details:

The TC840M1021(CDN) Acclimate detector is an intelligent, addressable, multi-sensing, low-profile detector designed for use with Honeywell (CLIP or FlashScan modes) Fire Alarm Control Panels.

Product Details:

The Honeywell TC810N1013 is an addressable control module designed for intelligent two-wire fire alarm systems, allowing for the control and monitoring of notification appliances like horns and strobes. It features built-in rotary switches for setting individual addresses, a high-immunity circuit that provides power and audio for speakers, and an integrated LED indicator that flashes green during communication and turns red when activated. This module is compatible with Honeywell fire alarm control panels and can switch 24 VDC power and audio for various applications.

Product Details:

The Honeywell CMF-300 is an addressable control module designed for use in Fire-Lite intelligent fire alarm systems. It provides a circuit for notification appliances like horns and strobes and allows for activation via panel programming on a zone or area basis. Key features include its ability to supervise Class A (Style Z) or Class B (Style Y) notification or control circuits, high noise immunity, and a panel-controlled LED indicator.
Here's a more detailed breakdown:
Addressable Control:
The CMF-300 uses one address on the Signaling Line Circuit (SLC) loop and communicates with the fire alarm control panel.
Notification Appliance Circuit (NAC):
It provides a circuit to control notification devices, which can be activated by the panel based on programmed conditions.
Supervision:
The module supervises the wiring to the connected notification appliances, reporting their status (normal, open, or short circuit) to the panel.
LED Indicator:
The CMF-300 has a panel-controlled LED that blinks green when communicating and turns red when activated.
High Noise Immunity:
It's designed with high noise immunity to minimize interference from electromagnetic or radio frequency sources.
Wiring:
The CMF-300 can be used for either Class A (Style Z) or Class B (Style Y) wiring.
Integration:
It seamlessly integrates with various fire alarm systems, offering flexible installation options.
LiteSpeed Technology:
It utilizes Fire-Lite's LiteSpeed communication protocol, which enhances communication speed between intelligent devices.
Installation:
It uses SEMS screws and clamping plates for easy wiring and installation.

Product Details:

Optical smoke detector which works using the light scatter principle to guarantee safe and early detection of fire. Responds well to slow-burning, smouldering fires. Intelligent fire detector with decentralized intelligence, automatic function self-test, CPU failure mode, alarm and operating data memory, alarm indicator, soft-addressing and operating indication. The detector is provided with an integrated isolator. A remote indicator can be connected.

Product Details:

Firephone Control Modules are intended for use in Honeywell intelligent,
two-wire systems, where the individual address of each module is selected
using the built-in rotary switches. This module is used to connect a remote
firefighter telephone to a centralized telephone console. A ringing sound is
provided at each off-hook handset until it is connected to the console. Wir-
ing to individual telephone jacks and handsets is supervised, and status is
reported to the panel as NORMAL, TROUBLE, or TELEPHONE. This module
has two pairs of output termination points available for fault-tolerant wiring,
and includes a panel-controlled LED indicator.